BK Radio DPH Bedienungshandbuch PDF herunterladen (Seite 16)

28 BK Radio

The number keys 2 – 9 allow for entry of the

letters printed on the respective keys. For

example, the first press of the [2] key enters the

letter A, the second press enters a B, the third

press enters a C, and the forth press enters a 2.

The letters Q and Z are entered with keys 7 and

9.

Keys 0 and 1 can be used to enter the following

characters:

0: 0, space, –, _, ., *, +

1: 1, <, >, /, \, |, $, %, h

Press the [ENT] key to store changes.

Press the [FCN] key to abandon changes.

PROGRAMMING A NUMERIC ID

Press [ENT] to display the numeric ID. Press

[CLR] then enter the new ID (up to 7 digits).

Press [ENT] to store the new ID. Select a new

ID to be programmed, or press and hold [ENT]

to exit Programming Mode (the PRG

annunciator will be extinguished).

EMERGENCY CALL

Note: Emergency operation only applies to channels

programmed for Digital or Mixed Mode transmissions.

To place an emergency group call, press and

hold the emergency button until the radio beeps

and the display flashes. On some models, the

emergency button may be the [PRI] key. All

scanning and priority scanning functions will be

disabled. Each subsequent press of PTT will

cause the radio to transmit on the knob-selected

channel with the emergency bit set, indicating

an emergency condition. If the Channel

Selector is changed, the Emergency Mode will

follow to the newly selected channel. Cycle

power to return the radio to normal operation.

PRG D

145

1

2

3

4

5

6

7

8

9

0

*

#

CLR

FCN

PRI

ENT

LABE

L

DPH-CMD Owner’s Manual 17

Your dealer can also assign more than one

function to the same top switch. For example,

both low-power select and RTA could be

enabled by the same switch.

NOTE: Assume for this manual that Switch

‘A’ has been programmed for

HI/LO Transmit Power, Switch ‘B’

has been programmed for Scan,

and Switch ‘C’ has been

programmed for Priority Scan.

To access functions on the keypad [FCN] key

menu:

1. Press the [FCN] key to display the

function menu.

2. Repeatedly press [FCN] to step through

the menu.

3. Press [PRI] to toggle the function on/off

when the desired menu item is displayed.

When the display flashes, the function is

enabled.

KEYPAD LOCK

To lock/unlock the keypad, press and hold the

[FCN] key. When locked, “LOCKED” will be

displayed if a key is pressed and a low beep

will sound.

LOCKOUT EXCEPTIONS:

PTT unlocks the keypad during transmit for

enabled DTMF key presses.

SCAN OPERATION

1. Slide Switch B

(scan)

up.

2. Slide Switch C (priority) down.

The display indicates scan operation by

flashing

SCN.

Scan operates only while the radio is not

transmitting. The radio checks for signals on

channels in the preset Scan List, as well as

the channel selected by the Channel Selector

knob.

1 2

3

4 5

6

7

8

9

0

*

#

CL

R

FCN

PRI

EN

T

SC

N

LABEL 3

LOCKE

D

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare