BK Radio DPH Bedienungshandbuch PDF herunterladen (Seite 4)

40 BK Radio

NOTE: To stop the ‘FAILURE’ Mode,

press [CLR], turn off both radios, and

try again, starting with Step 1 on the

previous page.

BATTERY INSTALLATION AND REMOVAL

BK Radio battery packs are available in a variety of sizes and types for

special applications. Rechargeable battery packs can be charged

separately or while attached to a radio.

NOTE: For safety reasons, rechargeable battery packs are shipped

uncharged or only partially charged. Therefore, a rechargeable

battery pack should be properly charged before use.

INSTALLING THE BATTERY

1. Locate the center hub on the radio base

and place it in the recess of the battery

pack.

2. Position the battery pack at the 30° offset,

seating the two metal studs in their recess.

3. Apply upward pressure to the pack while

twisting the pack to its final (in line with the

radio) position. The metal tab will click,

locking the pack in position.

REMOVING THE BATTERY

1. Turn the radio off.

2. As shown above, push up the metal tab

on the side of the case while twisting the

battery pack approximately 30°.

NOTE: All information programmed into

the radio is maintained even when

the battery pack is removed.

CLR

FCN

PRI

ENT

DPH-CMD Owner’s Manual 5

RF ENERGY EXPOSURE AWARENESS AND

CONTROL INFORMATION, AND OPERATIONAL

INSTRUCTIONS FOR FCC OCCUPATIONAL USE

REQUIREMENTS

BEFORE USING YOUR PORTABLE 2-WAY RADIO,

READ THIS IMPORTANT RF ENERGY AWARENESS AND

CONTROL INFORMATION AND

OPERATIONAL INSTRUCTIONS TO ENSURE COMPLIANCE WITH

THE FCC’S RF EXPOSURE GUIDELINES.

NOTICE: This radio is intended for use in occupational/controlled

conditions, where users have full knowledge of their exposure

and can exercise control over their exposure to meet FCC limits.

This radio device is NOT authorized for general population,

consumer, or any other use.

This 2-way radio uses electromagnetic energy in the radio frequency

(RF) spectrum to provide communications between two or more users

over a distance. It uses radio frequency (RF) energy or radio waves to

send and receive calls. RF energy is one form of electromagnetic

energy; other forms include electric power, radar, sunlight and x-rays.

RF energy, however, should not be confused with these other forms of

electromagnetic energy, which when used improperly can cause

biological damage. Very high levels of x-rays, for example, can

damage tissues and genetic material. The energy levels associated

with radio waves from portable 2-way radios, when properly used, are

not great enough to cause biological damage.

Experts in science, engineering, medicine, health and industry work

with organizations to develop standards for exposure to RF energy.

These standards provide recommended levels of RF exposure for both

workers and the general public. These recommended RF exposure

levels include substantial margins of protection. All 2-way radios

marketed in North America are designed, manufactured and tested to

ensure they meet government established RF exposure levels. In

addition, manufacturers also recommend specific operating

instructions to users of 2-way radios.

These instructions are important because they inform users about RF

energy exposure and provide simple procedures on how to control it.

Please refer to the following WEBSITES for more information on what

RF energy exposure is and how to control your exposure to assure

compliance with established RF exposure limits.

http://www.fcc.gov/oet/rfsafety/rf-faqs.html

http://www.osha.gov/SLTC/radiofrequencyradiation/index.html

1 2 3 4 5 6 7 8 9 ... 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare

BK Radio DPH Bedienungshandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radios BK Radio DPH